1 / 5
IKEA GNEDBY shelf lifting pegs / raising pins for Blu-Ray disc compartments — zdjęcie 1
1 / 5

IKEA GNEDBY shelf lifting pegs / raising pins for Blu-Ray disc compartments

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Raises a shelf by approx. 4 mm. Will make room for another row of Blu-Ray disc cases at the bottom of the rack.

Ocena
0 / 5
Polubienia
5
Pobrania
57
Wydruki
0
Wyświetlenia
359
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

When using the IKEA GNEDBY rack for blu-ray discs and placing the shelves on the pre-punched holes, the bottom compartment will not be high enough to put the cases upright.

Raising the shelf by just a few millimeters with these slim pegs will solve this issue without blocking the corners.

Single pegs may be printed without supports at 0.1 mm layer height.
Be careful when printing multiple pegs at once, the nozzle might knock them off when moving around.

Tagi