1 / 2
Generative Filament Rack
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Materials you'll need:
2x 1" dowels
4x screws (I used 1.75" 10-24 screws)
Wall anchors if you aren't mounting into studs.
I recommend assembling the brackets and dowels before mounting to the wall.
You may need to scale the spacer's thickness depending on the diameter of your spools.
Printed in PETG, 30% gyroid infill, 6 walls. Printed with supports only around the rear tab, in the orientation shown in the 3D viewer.