1 / 2
Hyperpixel (Round) + Raspberry Pi Zero Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cute little case for the Pimoorni hyperpixel round.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 246
- Makes
- 1
- Views
- 1,477
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a little case I designed for the Pimoroni hyperpixel round and raspberry pi zero.
To assemble you'll need:
- 4 3D Printed Parts from the attached STL
- Pi Zero (or Zero 2)
- Pimoroni Hyperpixel Round
- SD Card with Raspian image
- 4 M2.5 spacers (xmm)
- 4 M2.5 x 5mm screws
- Right Angle Micro USB to Micro USB Female Cable
Screw the interface plate, Pi and screen togeather
Insert SD Card and USB cable and place assembly into the main case
Route cable out the back and snap on the base
Press the cover ring into place (print in a contrasting colour for a bit of pop).