1 / 2
Original Prusa Enclosure Filament Passthrough with rubber gasket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Original Prusa Enclosure Filament Passthrough with rubber gasket
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Original Prusa Enclosure Filament Passthrough with rubber gasket.
Provides an almost air tight filament passthrough that also provides a bit of tension on the filament. Works great.
OBS. It will print a bit louder as the filament makes a little noise going through the gasket.
Print in two parts:
First print the gasket in flex (100 infill)
Print the passthrough and make I pause when the intire hole for the gasket is free. Put in the gasket and resume printing.
Fasten it to the inclosure with the original plastic ribbets.