Oppo Reno 10 - Camera cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The case for the camera - the most sensitive part of this phone.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 361
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Public Domain
The back panel of this phone is nice and durable glass, but the camera module is large and noticeably protruded. So this cover does not change the feelings and visuals of the back panel, it only protects optics.
It adds up only 0.3~0.4mm to the overall thickness and if printed from transparent filament does not obstruct the flash.
The cover grips nicely to the groove between the glass panel and metal camera ring and at the same time can be quickly detached to make a photo.
I have to admit that the design can be improved. For example, I would not refuse to have a single-hand release latch and a lanyard-style binding to the case. However, the design turned out to be quite robust so I did not have the justification to redesign it.
Tested with Oppo Reno 10 Pro 5g, but I have a strong suspicion it is compatible with Reno 10 5g, possibly Reno 10 Pro+ 5g, Reno 11, Reno Pro 11, and maybe Reno 8 T 5g
Printed out of Noname clear PETG 220-240° at max temp, 0.1mm layer, low speed, ironing, and 1.05 extrusion multiplier to make it more transparent. You can try to push it further.
I tried to print it with eSUN eTPU-95A scaled to 98% with a generic filament profile, and it worked, but this exact model is not very suitable for flexible materials.
That said, feel free to mess around with the sources in FreeCAD
