Water Level Indicator (Float) for LECHUZA Self-Watering Planter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Lechuza Water Level Indicator (Float) for the Self-Watering Pot (no polystyrene (EPS) is needed)
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 69
- Makes
- 0
- Views
- 749
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It all happened during a plant change…
Earlier I tried to grow gloriosa tubers in this pot, but they rotted away. After that, I decided to change them to Marantha Leuconeura. However, during the planting process, I found that the water level indicator float was deformed while restarting the pot. No matter how much I tried to fix it, nothing came out.
As a result, I made a new version of the float for Lechuza CUBETO Stone 30 graphite black based on the dimensions of the original one. This is also suitable for other LECHUZA Self-Watering Planters.
I printed the Float Top from PETG (Creailty), and the Float Base from ABS+ (eSUN), PETG is preferable.
I have modelled this project in Ondsel ES 2024.2 software.
#nosupports are needed
Like what you see? Click an image below and…
