Thermacell Refill Adapter (Durable)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For modified butane canisters (remove the one-way valve). Uses a piece of filament as valve pin for extra durability.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 176
- Makes
- 3
- Views
- 868
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Most Thermacell adapters are fragile because of the middle pin being so very thin. This version solves this problem by using a small piece of filament inserted into the middle hole. Fasten with e.g. CA glue.
The tolerances are very important for a good seal around the butane canister. The diameter of the hole should be just above 6,20 mm for easy insertion but also a tight seal. The model prints well with my current 0.4mm nozzle, but I have successfully printed it with a 0.6mm nozzle too.
The filament cut guide included is for cutting the filament to the proper length.
UPDATE V2: Smaller diameter hole for the gas tube, should not leak like the old version did when I recently printed it.