1 / 3
Apollo Automation Air-1 Wall Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for an Air-1 Sensor
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 64
- Makes
- 0
- Views
- 371
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a wall mount for an Apollo Automation Air-1 Sensor. It is a friction fit with the Air-1 and the sensor should click in to the base. The print is not square, the Air-1 is slightly more tall than it is wide.
Placement: The notch in the print shows how you should place the sensor. The “Air-1” text should be aligned with the notch. See pictures for example.
Be careful pulling the sensor back out, it can be tricky to take out so be gentle with it.
No supports needed. Mount with screws or velcro/double-sided tape.
Sensor page: https://apolloautomation.com/products/air-1