1 / 1
Owala Boot 24oz TPU
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protective boot for bottle.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 104
- Makes
- 0
- Views
- 486
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
It's a boot to protect the bottom of your 24oz Owala bottle. I printed it in TPU with a .6mm nozzle. 4 bottom layers, 3 walls, 0 top layers, 0% infill. If your running .4mm nozzle I would try 5 walls or making the diameter slightly smaller. There's also a version with a drain that you can cut off after its done printing.