1 / 1
Stiffening Ring for 5 Gallon Bucket for Use with the Oneida Cyclone
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this to prevent my bucket from collapsing under a vacuum
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 111
- Makes
- 1
- Views
- 756
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I made this to prevent my bucket from collapsing under a vacuum while blocking the end of the hose while using the Oneida low profile cyclone and a 5 gallon bucket.
Scale to fit your exact bucket. Mine was 11" and I beat it into place for a tight fit down the buckets internal taper.
I included screw holes on the side if you needed to screw it into the bucket. I didn't end up needing to.