1 / 1
Stiffening Ring for 5 Gallon Bucket for Use with the Oneida Cyclone
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this to prevent my bucket from collapsing under a vacuum
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 110
- Wydruki
- 1
- Wyświetlenia
- 754
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (51)Powiązane
I made this to prevent my bucket from collapsing under a vacuum while blocking the end of the hose while using the Oneida low profile cyclone and a 5 gallon bucket.
Scale to fit your exact bucket. Mine was 11" and I beat it into place for a tight fit down the buckets internal taper.
I included screw holes on the side if you needed to screw it into the bucket. I didn't end up needing to.