1 / 4
Vertical surf board stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mountable surf board stand that is very easy to use, very strong, and yet very cheap. Needs 58cm of 20 mm PVC pipe.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 17
- Makes
- 0
- Views
- 309
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Drill 2x 8mm holes in the wall, plug some anchors, and mount with 6mm countersunk wood screws.
I recommend 58 cm of 20mm PVC pipe. The pipe gets stuck in the model so well it needs no glue.
I printed it out of PETG with the standard settings on an MK4 and it works great. The wall mount I did with 15% infill, the end cap is fine with 15% since it carries no load.