1 / 1
Leather Burnishing Tool w/ Heat Inserts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A burnishing tool for leatherworking.
- Rating
- 4 / 5
- Likes
- 66
- Downloads
- 263
- Makes
- 1
- Views
- 1,160
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A leatherworking burnishing tool that attaches to a drill.
*You will need an M.3 or M.4 brass inserts (whichever works, I used M.4), a corresponding headless bolt, and a lock nut of the same size.*
To assemble:
1. Use heat to press a brass insert into the hole.
2. Thread in the headless bolt
3. Secure it using a lock nut.
For best results:
After assembly, attach it to a drill and spin it while using sandpaper to smooth it out.
Print Settings:
I printed at 0.16mm layer using regular PLA, 4 walls, ten top layers, four bottom layers, and 10% infill. It feels very sturdy.