1 / 4
Manual dust blower nozzle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The default nozzle is difficult to reach in certain areas of my computer, so I created a 45-degree version.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 23
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I've had this dust blower for a while, but I found it hard to reach certain spots on my computer. So, I designed a 45-degree angled tip for it.
It's a quick print requiring minimal supports.
Print Settings:
- Materials: PLA, ABS, ASA, PET-G, etc.
- Supports: Enabled, using normal supports to reduce wobbling.
- Wall Thickness: 3 walls or more.
- Adhesion: No brims necessary.
Print orientation
