KTM Powerparts Seitentaschen - Ersatzteil Haken
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
OEM Nummer: 76012925100 - motorcycle panniers
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 566
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hook for the Bags from KTM Powerparts. It brokes and we didnt get it from the Dealer.
Parts List:
4x M5 x 12mm
4x M5 nut
After the prototyping I printed it with Nylon with Carbon Fiber. You should not print it in PLA, that would be really dangerous!!!
I used Nylon with Carbon Fiber, ASA should also work or at least PETG.
Make the print really strong!
My Settings for the final print in Nylon with CF:
7 Perimeters
Solid layer bottom and Top 7
Infill 30%
I printed two in case of problem during the holiday I have an additional spare Part with me!
I drawed the “KTM_Ersatzteil_Tasche” and mirrored it in the Slicer - but the holes doesn't fit on the left side so I edited a little bit that it works for the left side → KTM_Ersatzteil_Tasche_Left
At your own risk! If something breaks in a curve at high speeds over 100 km/h, it can have serious consequences!!