1 / 3
KTM Powerparts Seitentaschen - Ersatzteil Haken — zdjęcie 1
1 / 3

KTM Powerparts Seitentaschen - Ersatzteil Haken

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

OEM Nummer: 76012925100 - motorcycle panniers

Ocena
0 / 5
Polubienia
1
Pobrania
17
Wydruki
0
Wyświetlenia
566
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hook for the Bags from KTM Powerparts. It brokes and we didnt get it from the Dealer. 

Parts List:

4x M5 x 12mm
4x M5 nut

After the prototyping I printed it with Nylon with Carbon Fiber. You should not print it in PLA, that would be really dangerous!!! 

I  used Nylon with Carbon Fiber, ASA should also work or at least PETG. 

Make the print really strong! 

My Settings for the final print in Nylon with CF:

7 Perimeters
Solid layer bottom and Top 7
Infill 30%

I printed two in case of problem during the holiday I have an additional spare Part with me!

I drawed the “KTM_Ersatzteil_Tasche” and mirrored it in the Slicer - but the holes doesn't fit on the left side so I edited a little bit that it works for the left side → KTM_Ersatzteil_Tasche_Left

At your own risk! If something breaks in a curve at high speeds over 100 km/h, it can have serious consequences!!

Tagi