Peg with M3 nut mounting
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.50 – €0.61 net (excluding VAT)
For file: Peg for Enclosure_0.4n_0.2mm_PETG_MINI_35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.56 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 34.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Add a peg to my Printer enclosure (or any 3mm hole) using an M3 Nut and bolt
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 24
- Makes
- 1
- Views
- 151
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I wanted to attach a filament bag to the side of my printer enclosure to tidy away all the waste filament. So I adapted the peg and created a way of attaching the peg to the side of the enclosure.
You will also need:
1xM3 Nut
1x M3x8mm Hex screw (or longer)
Material: PETG
Layer: 0.2mm
Infill: 20%
Support: No
Brim: No