1 / 2
RatRig Stronghold Pro Magnetic Dustboot with Dock — image 1
1 / 2

RatRig Stronghold Pro Magnetic Dustboot with Dock

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Dustboots for the RR Stronghold Pro with Dock to be used with a Toolchanger.

Rating
0 / 5
Likes
23
Downloads
162
Makes
1
Views
847
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

Update: I was told that there was some 2mm magnet-holes in the body, when they should be 3mm. I corrected this in the fusion and the STL-Files, but not in the Pre-Sliced files. You either need to work with the STL's, or buy some 2mm magnets as well.

----

I wasn't happy with any of the existing Dustboots for the RR Stronghold Pro. 
Also i'm using a Rapidchange Toolchanger Magazine since quite some time, and wanted my Machine to be able to drop and pick up the dustshoe by itself for easy automatic toolchanges. So I designed a rack that gets mounted to the machine bed as well.

I also made the Hose-connection magnetic. I have a smaller hose with another connector and a small printed brush-attachment by the machine, so that I can use the machines dustcollection to clean the table.

 

You need: 

  • approx. 30pcs 8x3mm round neodymium magnets (the stronger the better)
  • short m5 screws to screw the body to the spindle mount. Might need to tap the holes in the spindle mount, i can't remember if those came tapped already.
  • Brush for the Dustshoe. I've used something like this: https://www.aliexpress.com/item/1005003577476445.html?spm=a2g0o.productlist.main.1.6e121d7fEd6iAF&algo_pvid=0bc20501-09dd-4a7a-8b6d-04c1cc4e48cf&algo_exp_id=0bc20501-09dd-4a7a-8b6d-04c1cc4e48cf-0&pdp_npi=4%40dis%21CHF%216.15%216.15%21%21%216.82%216.82%21%40211b804117331837514358805eea32%2112000026351498377%21sea%21CH%21126601076%21X&curPageLogUid=PzWHnCS5CHf2&utparam-url=scene%3Asearch%7Cquery_from%3A

 

For the Print:

  • I've added bambu-project files to the folder.
  • If you've got an AMS I'd suggest to use some kind of easy to remove Support-Material, as the supported regions are critical for the docking and undocking working properly. Use the files containing the “SupMat” Tag
  • If you dont have an AMS, you can try the files with the “NoSupMat” Tag, but I haven't tested those
  • The Bambu Files also contain the necessary pauses to put in the magnets.
  • Make dure to have the magnets in the right orientation! I always color one side of mine with a sharpie to help with this process
  • Leave the Print running until it stops for inserting the magnets. Insert the magnets, and apply a small layer of gluestick over them, this helps the new plastic to bond.
  • Resume the print and observe for the first layer

 

After the Print:

  • Remove Support Material
  • Shorten the brush before gluing it in. Use the Holder as a length reference.
  • Glue in the brush with epoxy

 

Hope this helps, Just ask in the comment section if there are any questions.

Tags