RatRig Stronghold Pro Magnetic Dustboot with Dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dustboots for the RR Stronghold Pro with Dock to be used with a Toolchanger.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 162
- Wydruki
- 1
- Wyświetlenia
- 847
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Update: I was told that there was some 2mm magnet-holes in the body, when they should be 3mm. I corrected this in the fusion and the STL-Files, but not in the Pre-Sliced files. You either need to work with the STL's, or buy some 2mm magnets as well.
----
I wasn't happy with any of the existing Dustboots for the RR Stronghold Pro.
Also i'm using a Rapidchange Toolchanger Magazine since quite some time, and wanted my Machine to be able to drop and pick up the dustshoe by itself for easy automatic toolchanges. So I designed a rack that gets mounted to the machine bed as well.
I also made the Hose-connection magnetic. I have a smaller hose with another connector and a small printed brush-attachment by the machine, so that I can use the machines dustcollection to clean the table.
You need:
- approx. 30pcs 8x3mm round neodymium magnets (the stronger the better)
- short m5 screws to screw the body to the spindle mount. Might need to tap the holes in the spindle mount, i can't remember if those came tapped already.
- Brush for the Dustshoe. I've used something like this: https://www.aliexpress.com/item/1005003577476445.html?spm=a2g0o.productlist.main.1.6e121d7fEd6iAF&algo_pvid=0bc20501-09dd-4a7a-8b6d-04c1cc4e48cf&algo_exp_id=0bc20501-09dd-4a7a-8b6d-04c1cc4e48cf-0&pdp_npi=4%40dis%21CHF%216.15%216.15%21%21%216.82%216.82%21%40211b804117331837514358805eea32%2112000026351498377%21sea%21CH%21126601076%21X&curPageLogUid=PzWHnCS5CHf2&utparam-url=scene%3Asearch%7Cquery_from%3A
For the Print:
- I've added bambu-project files to the folder.
- If you've got an AMS I'd suggest to use some kind of easy to remove Support-Material, as the supported regions are critical for the docking and undocking working properly. Use the files containing the “SupMat” Tag
- If you dont have an AMS, you can try the files with the “NoSupMat” Tag, but I haven't tested those
- The Bambu Files also contain the necessary pauses to put in the magnets.
- Make dure to have the magnets in the right orientation! I always color one side of mine with a sharpie to help with this process
- Leave the Print running until it stops for inserting the magnets. Insert the magnets, and apply a small layer of gluestick over them, this helps the new plastic to bond.
- Resume the print and observe for the first layer
After the Print:
- Remove Support Material
- Shorten the brush before gluing it in. Use the Holder as a length reference.
- Glue in the brush with epoxy
Hope this helps, Just ask in the comment section if there are any questions.