1 / 5
Undercarriage Fan Shroud for Lawsys New Carriage v2 - Solidoodle — image 1
1 / 5

Undercarriage Fan Shroud for Lawsys New Carriage v2 - Solidoodle

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Made an underside fan duct that fits Lawsy's NEW replacement carriages - centre front v2. i have an e3d v6 on my…

Rating
0 / 5
Likes
4
Downloads
10
Makes
0
Views
255
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Made an underside fan duct that fits Lawsy's NEW replacement carriages - centre front v2. i have an e3d v6 on my solidoodle, i dont know if it fits with another hot end.

It bothered me that the only fan duct out there was Lawsy's fan duct, which is made for a 30x30x5 mm fan, which is impossible to find. So i made one that can be adjusted to 30x30x7 or 30x30x10. (adjust to desired height using washers - see pictures).

i could not get it to print, so i made a stripped down version first, printed that, used that with a 30x30x10 fan to print the actual fan shroud. For your convenience i included the temporary fan shroud as well.

It can be printed without support standing on the face were the fan is mounted on it (picture 3). i printed this in PLA and it works just fine for 50+ print hours and counting. Use m3 bolts to secure the fan to it, the holes for this are a tight fit, no need for a nut.

if you didn't insert a nut into Lawsy's NEW replacement carriage v2, you will have to take it apart and insert them, this will not hold without those nuts (m3).

---description is a work in progress---

Print Settings

Printer Brand:

Solidoodle

Printer:

Solidoodle 2 - Base

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

15%

Notes:

This will not print if you don't already have a part cooling fan.. in that case, print the temporary fan holder, mount it under the carriage and use that with a fan to print the actual fan shroud (v3.1).

For the best result, print it again now with the actual fan shroud.

Category: 3D Printer Parts

Tags