1 / 2
Tinywhoop Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Basic stand for Tinywhoops. Has some steep overhangs, so be sure your printer can handle angles of approximately 55 degrees from verticle axis (ie, high fan and slower printing).
My version is not a great example as the overhangs are rough, but it works. Printed on a standard Prusa MK3S+ at 0.2mm layer height.
Longer Arm version has a… longer arm. Better for 75mm whoops