Honda Pilot Transmission Dipstick Fill Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my latest revision
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 249
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is my latest revision of my dipstick tube adapter.
I made this for my 2003 Honda Pilot. There are two ways to fill the transmission, either through the dipstick or through the port where a cooling jet is installed. Accessing the port is a pain to get to beneath the intake hose. Finding a funnel that fits the dipstick has always been a challenge. This is designed specifically for the 1st generation Honda Pilot. It may work with others.
This needs to be printed in TPU. The nubs at the end create a very nice seal and I found this to be significantly more durable than printing in any other hard filament including nylons. This also doesn't require the use of o-rings to create the seal. Print with no supports necessary.
You will need a ½" ID hose and a funnel that fits into the hose. This revision without a doubt is my final and favorite. I had zero leaking, it fit snug, and is very durable.
