Honda Pilot Transmission Dipstick Fill Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my latest revision
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my latest revision of my dipstick tube adapter.
I made this for my 2003 Honda Pilot. There are two ways to fill the transmission, either through the dipstick or through the port where a cooling jet is installed. Accessing the port is a pain to get to beneath the intake hose. Finding a funnel that fits the dipstick has always been a challenge. This is designed specifically for the 1st generation Honda Pilot. It may work with others.
This needs to be printed in TPU. The nubs at the end create a very nice seal and I found this to be significantly more durable than printing in any other hard filament including nylons. This also doesn't require the use of o-rings to create the seal. Print with no supports necessary.
You will need a ½" ID hose and a funnel that fits into the hose. This revision without a doubt is my final and favorite. I had zero leaking, it fit snug, and is very durable.