1 / 4
DIY Sand Blast Booth - Glove Ports
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flanges for glove ports for DIY Sand Blast Booth
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 51
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
Built a DIY sand booth and designed the inlet flanges that hold the gloves for the hand ports.
Bottom Flange is inserted from inside the tote and the top flange from the outside. Flanges are then screwed together with (8) #6 - 1in screws and nuts.
Gloves were turned inside out at the ends and attached using zip ties once Top and Bottom pieces were screwed together.