1 / 8
Salt-Shaker refill helper/Salzstreuer Nachfüllhilfe (+OpenSCAD Source) — image 1
1 / 8

Salt-Shaker refill helper/Salzstreuer Nachfüllhilfe (+OpenSCAD Source)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Makes refilling some salt-shakers comfortable and fun. Mehr Spaß und Komfort beim Nachfüllen diverser Salzstreuer.

Rating
0 / 5
Likes
9
Downloads
27
Makes
3
Views
189
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution

Overview

There's these salt-shakers that you can buy at the supermarket that everybody seems to have at home. They're very handy in the kitchen, but given the amount of salt they contain, they're quite expensive.

To maximise profit, the manufacturers made refilling them as inconvenient as imaginable.

This refilling-helper not only makes refilling these easy, but also very satisfying to watch as the crystals find their way into the shaker. Once you're done, give it a slight bump, twist and remove the refiller.

Features

This kitchen helper item has a few nifty features.

The top side is the sliding part, while the bottom side with the cutouts directly fits onto your shaker. Just align the large pouring spout of the shaker with the whole of this funnel. Now here comes a twist, quite literally. Since the cutouts in the refiller align with the various ribs and groves of the shaker, you can now twist the helper until the large spout opens.

Get your cheap bag of sodium-chloride, or kitchen salt, as the chemists colloquially call it, and pour into the funnel.

Enjoy as the crystals tumble into the shaker easily and without making a mess on your counter top.

Oddly satisfying
Fillup indication

When you see the flow starting to slow down, you've almost reached a full fillment. As the air pressure builds up, it causes the salt to slow down. That way you know, your shaker is almost full. Bump the refiller to let the last crystals tumble in.

But what if… you've had so much joy watching the salt cubes slide in… that there's some salt left in the funnel that won't go in anymore? Don't worry, remember the twisting motion! Just twist the funnel by 90°, or a quarter turn and you should end up at a closed position. Now it's easy to pour back the overflow into your bag.

Once you're done, just pop off the refiller and enjoy your shaker one more time.

Cleaning

Being a kitchen item, cleaning might come to your mind occasionally. If you follow the print setting instructions, you can simply give it a rinse under water and let it air dry. I've even tested letting my refiller take a tour in the dishwasher and it came out undamaged, ready to refill again.

Printing

Here's a few things you need to set up for a perfect print.

  • Recommended material: PET-G (It's food safe, that's why it's used for beverages and food packaging all over the world.)
  • In Průša Slicer start with the 0.10mm FAST DETAIL setting, then change these settings:
    • Print Settings > Layers and perimeters > Vertical Shells: Set the perimeters to 4 This makes sure your overhangs come out clean and the whole structure becomes water tight. Also, the finer the layers the smoother the sliding action.
    • Print Settings > Layers and perimeters > Advanced: Set Seam Position to random to get a nice outer shell and a seamless funnel inside.
    • Print Settings > Infill > Ironing: I recommend turning Ironing on. It adds about 20 minutes of print time on a Průša MK4, but it's totally worth it.
    • You can leave everything else at their default settings.
  • The .stl file is already correctly oriented, so no need to flip the object on your build plate. Just to make sure, it's printed funnel side down, as illustrated in the pictures.
  • There's no need for a brim nor supports! I absolutely recommend cleaning your bed before this print to ensure proper bed adhesion.
  • Once your print is done, let the bed cool down to room temperature before removing the item to prevent damaging the delicate edges of the funnel.

Source Code

Source code for this item is provided for OpenSCAD. So if you need to change the diameter just ever so slightly to fit your shaker of choice, you have everything you need to adapt the model to your needs.

Compatibility

If you're scared of using OpenSCAD, feel free to leave the measurements of your shaker, and I can try to render a version for you.

  • Bad Ischler kristall Salz and Spezial Salz: Outer diameter: 49.4mm

Enjoy

If you enjoy this model, please leave a make and don't forget to add the type of shaker you're using.

Tags