1 / 1
Raspberry Pi4 case with camera ribbon slot and arm.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry Pi4 case with camera ribbon slot and arm to hold the camera.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 42
- Makes
- 1
- Views
- 500
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Raspberry Pi4 case with camera ribbon slot and arm to hold the camera.
Cam arm is optional ofcourse. I found it annoying that most cases would block the ability to use the ribbon cable connector so I made this.
BoM
- M3 nuts/bolts for attaching the camera arm
Printing
- Only support needed for the camHolder