1 / 2
External Overflow Strainer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have a few tanks that are drilled toward the bottom and use a 1/2" PVC standpipe to set the water level.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 45
- Makes
- 0
- Views
- 568
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I have a few tanks that are drilled toward the bottom and use a 1/2" PVC standpipe to set the water level.
I started off with a cap style, but if it became clogged, I'd have a spill. So I came up with these, that still provide straining, but if the water gets high enough it will still drain unimpeded.
This style goes ouside of a a male 1/2" PVC fitting.
Print instructions
Category: Hobby Print Settings
Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: 20%