1 / 2
Floppy Disk NFC Tag Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Floppy Disk that holds an NFT tag. Parametric.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 35
- Makes
- 0
- Views
- 264
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a parametric model of the floppy disk. The STL file is 60% of the original size and a little bit thicker that the original size to hold the NFC tag better. The bonus of this size is that it is just as wide as a credit card.
When scaling the model in fusion 360 use the multiplier parameter to scale the model. The tag hole size stays the same.
Recommender print settings:
- layer height: 0.12 mm
- Print nozzle: 0.4 mm
The NFC tag i used is this one (Affiliate link): https://s.click.aliexpress.com/e/_Dev4RYb