1 / 9
Case for Xiaomi Redmi Note 11 Pro 5g with USB C cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case I modeled for my phone. Printed in TPU
- Rating
- 4.667 / 5
- Likes
- 20
- Downloads
- 197
- Makes
- 3
- Views
- 988
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed this case with the camera protection separately because I didn't want to print it with a lot of support but you can choose how you want to do it.
I took a soldering iron (didn't have good glue at this moment) for assembling them (200°) and a heatgun (100 - 120°) for folding the USB C cover.
I used PolyFlex TPU 95A
I Sliced it in PrusaSlicer 2.8.0 with the default 0.2 Quality profile
I modified the following settings :
- Adjusted Supports (Snug)
- Small perimeters speed set to 10mm/s
- Only one perimeter first layer