Fuse Pullers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Standard Digital File License
This is a 3D printable pair of fuse pullers for pulling cylindrical fuses out of electrical boxes. Easily printed flat and fully assembled.
!!!!Warning: I am not an electrician or safety engineer. This is a model I designed for personal use and am not responsible for any damage or bodily harm that occurs from electrical short circuit/shock. Print and use at your own risk!!!!!!
Printing instructions:
Recommend printing in ASA, ABS, or any other durable, NON-CONDUCTIVE, material.
Print flat on build plate with preferred layer height.
Recommend printing with at least 4-6 walls.
Infill at 15% or higher set for gyroid pattern.
At least 8mm brim to help prevent warping.
Once printed, carefully pull off build plate and gently pry/twist on the handles and jaws to break the mating surfaces free and operate pliers to ensure they were printed properly.