1 / 1
DuckSpecSeat
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Racing seat designed to fit the rubber ducks found within Big Tree Tech merchandise. w/ stepper adapter.
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 70
- Makes
- 5
- Views
- 592
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
This is a Racing seat designed to fit the rubber ducks found within Big Tree Tech merchandise.
printed to voron part spec:
Layer height: 0.2mm
- Extrusion width: 0.4mm, forced
- Infill percentage: 40%
- Infill type: grid, gyroid, honeycomb, triangle, or cubic
- Wall count: 4
- Solid top/bottom layers: 5
- Supports: NONE
you will need:
1x fearless duck
2-4x M3 heat inserts
2-4x M3x6 (M3x8 works too)
2x zip ties (for seatbelts)
(if using magnet adapter you will need 3 6x3 magnets)
For the magnet adapter just add a pause to insert the magnets.
-insert the heat inserts into the adapter,
-attach seat to adapter with M3 fasteners,
-attach duck and zip-tie into place (you'll need to remove it's squeaker)
-then slide over stepper motor.