5mm OD PTFE Tube Upgrade Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows installation of 5mm OD PTFE Tubing, compatible with Prusa XL Enclosure
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 148
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
These upgrade parts will let you switch to 5mm Outside Diameter PTFE tubing. You will not be able to use the Filament sensors with this upgrade as 5mm PTFE tubing will not fit. After installation you must recalibrate all tool positions. Compatible with the Prusa XL Enclosure.
Print in PETG at 40% Cubic Infill
No supports
0.4mm Nozzle
It is a good idea to do these upgrades at the same time as installing your Prusa XL enclosure as you have to take apart each extruder anyways to replace the PETG parts with CF-Polycarbonate.
You will need 5mm PTFE connectors, I have verified that this listing has the correct size for the Prusa XL extruder:
https://www.aliexpress.us/item/2255799962778683.html
You need to purchase the type PC5-M5 for the Extruder.
You should drill out these Connectors to 2mm for a better fit. I recommend buying extras.
If you would like to use the modular spool caddy, also buy PC5-1 connectors from the same listing:
https://www.printables.com/model/687932-xl-modular-filament-caddy
The PC5-1 connectors do not require any modification.