PWM Fan Speed Control Module Case
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.86 – €1.06 net (excluding VAT)
For file: fan_control_case_0.4n_0.15mm_PETG_MK4_1h0m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.96 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Protective case for PWM Fan Speed Control module.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 247
- Makes
- 4
- Views
- 687
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Protective case for PWM Fan Speed Control module as it can be purchased by DONKGER on Amazon (and probably on other platforms too :) )
I provide the FreeCAD project file, in case you want to make changes to the design.
Print Settings
Nothing special, just make sure to use a filament that can handle bending of the snap-fit joints. I used PETG.
- Layer height: 0,15mm
- Nozzle: 0.4
- Infill: 15%
- No supports