Creality K1 / K1C / K1 Max Solid Bed Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A solid bed mount to replace the metal ones that come with the PRTouch leveling system. Designed for Cartographer/Beacon
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 277
- Makes
- 2
- Views
- 2,584
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
This is a recreation of a model I can no longer find. The original K1 rigid bed mount was designed by BootyJones. Once I can locate it publicly I will credit it here.
These are solid bed mounts for the K1 / K1C / K1 Max to replace the flexible metal ones that are part of the PRTouch/pressure cell stock leveling system. You'd only want to install these if you have replaced PRtouch with a Cartographer, Beacon, or similar probe.
There are three models:
One that is 12mm tall that is designed to be installed by itself.
The second is ~5mm tall with a 1mm recession designed to center an 8mm silicone spacer (for 13mm in total height) if you want to be able to fine-tune each corner.
The third is basically the first model, with a cutout for my K1 Max bed fans remix so you can install both modifications together.
Link to compatible 14mmx8mm silicone bed spacers: https://www.amazon.com/FYSETC-Silicone-Leveling-Compatible-Switchwire/dp/B0BK3L3T8S/?th=1