Depth-regulated Plexiglass door enclosure hinge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hinge to hold a plexiglass panel to serve as a door on enclosure
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 264
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
All parts are designed to bend slightly past 90 degrees for more adjustability
There are a few models, all are interchangeable and don't need supports to print - “plexi hinge" is the part that holds plexiglass panels with M3 bolts (in my case 3mm panel is held with 16mm bolts) and nuts (optional), while “wood hinge” is the part that's attached to wood with almost any screws. Both parts are hinged with 20mm M3 bolt and a nut to adjust tightness.
“deep hinge” allows you to close the panel in a way that it goes inside (up to 20mm depth) as you see on pictures, while normal hinge is just a normal hinge.
“wood hinge” with a long hole allows you to adjust the hinge during installation