Letter punch jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
No more punching wonky letters. Just straight professionalism.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 63
- Makes
- 0
- Views
- 404
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
In work we sometimes use letter punches for marking metal. But it is so hard to make the lettering straight. So I designed this simple jig to help with alignment. Simply insert your 12x12 mm punch into the insert and position it to the next slot. The base has two magnets (d=13mm, h=3,3mm) used for holding to the metal plates. For storing the jigs insert, there is a snap-in feature so you never lose it. The insert has integrated springs that ensure the punches are pushed to a corner of the insert. It is important when the ends of the punches are hammered out and have bigger dimension than the middle of a punch.
Added jig for 3, 5, 7, 10 numbers - can add additional just ask for a number of letters/numbers.
Printing:
5 perimeters, 15% adaptive cubic infill, supports only for the snap-in feature on the base