1 / 1
Bead thermistor mount for 30 series extrusion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed in the RatRig style, mounts with the traditional M6x12 cap head hex screw. Zip tie channel to hold thermistor.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 61
- Makes
- 0
- Views
- 359
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with 0.2 or 0.25 layers, typically ABS or ASA for RatRig users.
Use a small zip tie to hold the thermistor in position. The glass bead should be held flush to the surface or slightly below, so it gets good exposure to air, but is protected. There exit channels for the wire in two directions. The overall compact size allows other wires to pass behind the mount (ie, next to the exposed zip tie).