ESP32-Cam Plumbus Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.26 – €0.32 net (excluding VAT)
For file: plumbus_esp32cam_0.4n_0.2mm_PETG_MK4IS_17m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.29 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 16.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
ESP32-Cam Plumbus Adapter that was previously used with Raspbery Pi Camera
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 42
- Makes
- 1
- Views
- 498
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I use Plumbus for my Raspberry Pi camera, so I wanted the same system for ESP32 as well
You have to glue both parts together, one goes to ESP32 case by Michal Fanta and second is adapter for Plumbus