Magic the Gathering Commander Double Deck Box

I originally designed this box to hold two MTG commander decks facing outward with a middle section to hold dice and other accessories. There's a similar box on Amazon. After making two for myself, I decided to add more options with different divider options.

There are two main variations of the box. One has eight small bumps to help the lid stay on. The other has holes large enough for 3mm x 1mm round magnets. Both option comes with either no divider, one central divider, two dividers, or three dividers. The two divider version is what I printed and use for either two commanders and a standard deck or a commander and extras. The other options all have equally spaced areas, making the three divider version perfect for four standard decks.

The lid also comes in two variants. Both have holes sized for 3mm x 1mm magnets or are large enough for the bumps to clip into. One has cutout holes to show the two most outer cards, perfect for the commander decks. The other has no holes. The boxes all have small cutouts so there will still be a gap for opening with this option.

I recommend printing the box bottom down, no supports. For the lid, I also recommend no supports and printing face down. I printed my red lid with supports and they are almost impossible to remove. My blue lid had no supports and the lettering look great.

If you have any requests or recommendations on how to improve this design let me know!

EDIT: Fixed an issue where the friction box was longer than the lid. All boxes should now fit within any lid.