Window blocker for portable AC unit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
All the bits you need to block off a window (with 4mm plywood or similar) and then connect up your portable AC unit
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 77
- Makes
- 0
- Views
- 1,422
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Needed to block off an outward opening window to vent my portable AC unit,
All parts printed in PETG to allow for a little bending and weather resistance.
The connector for the host is a little tight but the hose connection has some play to it so it's not too difficult to fit.
You'll need M3 bolts and nuts for the vent connections and also for the braces.
If you find the board is slipping down, you can print the optional aligner and put a couple of them across the bottom to rest against the inside edge of the window frame.