ScrewMount Any STL DIN7505 - Negative Object
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed to Screw mount some 3D STL-s which did not have a screw mount holes.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 89
- Makes
- 0
- Views
- 469
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
I had to mount some stuff to the before it was 3D printed and it was missing a screw mount altogether.
I wanted to use standard wood screws, i threw together a template which i could use as a negative object in Prusaslicer and just substract it from the original model. Easy wall mount.
I created it later in all sizes. I hope it helps you all.
Tolerance used: Added 0.2mm to the diameter mentioned in this table.
Designed them according to DIN7505
I have always enjoyed the fact that you can manipulate an object in Prusaslicer quite easily, so this ones takes full advantage of that. Positioning them in the middle was tricky to say the least.
Printed with Prusament Yellow, 0.8nozzle 0.5 Layer Height.