1 / 1
Parametric Plant-in-Place-Holder / Straightner / Support
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fully customizable support arm for plants. Simply fill in 'PotDiameter' - 'PotRimWidth' - 'PlantStemWidth' and print.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 40
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Fully customizable support arm for plants.
Instructions:
- Open the .f3d-file in Fusion360
- Click Design > Solid > Modify > Change Parameters . The Parameters dialog displays.
- Fill in 'PotDiameter' - 'PotRimWidth' - ‘PlantStemWidth’
- Save as .3mf and load into your Slicer.
I have attached a print file for a pot with 185mm diameter, 8mm rim width and 20mm plant stem.
Printing profile:
PLA / PETG
3 perimeters (0,4 nozzle)
20% infill
no supports
Filament used: GEEETECH Silver PLA