149 models
I always forget to put my hair straightener away while I wait for it to cool down. Plus I wanted to have it always handy but not creating clutter. So I designed this wall mount! Hope you find it useful as well!
1) remove the old silicone 2) clean with, for example, isopropyl alcohol 3) apply silicone and wipe with an 8 mm squeegee in the direction of the slant (so that the silicone gets everywhere without air bubbles) 4) tear off the silicone…
My wife says this is the most-used tool at her pottery studio! Just hold the tool and press it into your piece to straighten any wobbly or uneven rim. Can also be used to stabilize pieces while trimming. Printing Instructions: Just print…
I created these PTFE Tubing Straighteners to help straighten out PTFE tubing (4 mm outside diameter) that has been coiled up since manufacture and wants to continue to be coiled up tightly when you need it to be straight (or at least…
Use Asa for more safety, PETG works also well.
Simple three bearing wire straightener. Hook the offending copper zap-snake under the front bearing, over the middle one, and under the third. Stroke it. Stroke it good. There, now it's straight. I printed mine in petg, 5 perimeters all…
Now, it's easier to print a lower grip. I divided the grip into two parts and added a small feature to make it easy to fit the two halves. Supports are only used on the build plate. I also did dbranding because small areas between the…
The best color is one that matches the stocking in the back.
Overview This is a wall mount for a hair straightener that uses the Toughbuilt ClipTech hub mounting system You will need one of these: https://www.printables.com/model/1521234-remix-toughbuilt-cliptech-hub-wall-mount Printing Print the…
Keep your room organized and your walls safe with this modular hair straightener holder. Unlike many other designs, this model is built for safety and flexibility. Features: Modular Design: Print and use the holder alone or combine it…
At my workspace I use all spraycans through their long pointy nozzles. Since some designs have changed, I didnt like them occasionly falling out of position when using them. This is my quick workaround for my personal preferenzes and…
NOTE: This design has been superseded by my latest remix: https://www.printables.com/model/338073-bambu-x1-ptfe-extruder-bracket-ams-error-fix I believe the one above to work better! But if the one above doesn't work for YOU, it may be…
My girlfriends tends to just lay her hair straightener on the floor to cool down and I trip over it in the middle of the night way too often, so I designed this wall mount for it. I tried many of the already existing hooks first BUT her…
This was first inspired by @ ktothestank who made a simple wire straightener. I printed and tried it since I'm doing a lot of ethernet terminations, and decided to start from scratch and iterate 5 times on something that would have more…
This tool can be used to straighten standard DIP IC legs before insertion into a breadboard, PCB or protoboard. When manufactured, ICs are made with the legs slightly splayed so that they will stay in PCBs when inserted by automatic…
Wire Straightener by Qwerm This is a tool to straighten out coiled wire. Two sets of these straighteners mounted perpendicular to each other can be used to straighten out wires that have more complex bends in them. I made this tool to…
While working on a project recently, I found that I couldn't easily find metal pins of the exact length I needed, and I didn't have the tools to cut them to size. I did, however, have plenty of PLA filament that was the right diameter!…
I made this tool after separating a couple hundred pairs and the tips of my fingers began to hurt. The end of the tool is just big enough to fit the two ends inside and the thin body of the tool allows you to roll it with ease. Along the…
4 Corner : 90° - 16 mm - 10 mm - Radius 16 mm
Wire straightening hand tool. Two colors are shown for clarity. All press-fit parts. No supports are needed, but I did use a 3 mm brim. Also, I placed the three "rollers" close together so their brims touched. The idea is to create an…
just print and screw the pieces together to help straighten the ethernet cables and makes it easier on your hands Can be used with a heat insert or tap out the 0.2mm 1st layer and a just use an 3m nut Hardware: M3x3.6 or 4mm heat insert…
Printed in M3D matte Lavender PLA on my MK3s+ at .2mm on a .6mm nozzle. Attribution: Hair Dryer and Straightener Holder created by drabisko.
This is a tool to straighten your filament Print instructions The tool is for straightening filament for easy filling the filament buffer Here is how it works: (ignore the audio book in the backround :D) BOM: printed parts: 1x cover…
A print in place version of the Ethernet cable straightener. A second hole has been added to straight the wire pair, if desired. Printed in overture PLA Professional (PLA+) for best strength @0,20
A honeycomb mesh to be placed on top a 120mm square axial fan that converts most of the spinning, turbulent airflow into straight, somewhat laminar airflow. I use gravity and friction fit to mount this on top of the fan for my DIY air…
My wife always left her hair straightener on the floor to wait for it to cool down before storing it, which was not only a tripping hazard but a burning one. I designed this holder in such a way that you can stall with adhesive strips and…
The tinker and breadboard friendly dual inline package (DIP) has one slightly annoying feature to it. The factory bend leads don't face straight down, but at an angle that makes inserting them a hassle and usually requires straightening…
Identical to the amazing original twist tool, but instead with an added flat bottom to allow for printing flat. Printing this model flat allows for the layers to work with the tool, rather than snapping easily from being printed upright.
I just filled the screw holes since I planned to stick it with biadhesive
My wife has used the crap out of this for the last 5 years since the original's debut. She's graduated to regularly using three items in the bathroom now, and it was time for an added redesign. The wall mounted lock portion is not…
This is a printable tool for accurately bending an IC chip's leads, so that their legs are straight and perpendicular to the body of the chip. This allows for chips to be easily placed in their respective sockets. Simply slide the chip…
As per the title, this directs air straight toward the intended target for 120mm PC fans, mainly used in wind simulator for sim racing. Screw holes are 105mm apart, should fit most if not all 120mm PC fans with standard screw spacing.…
There is no news that Creality Ender 3 X axis belt is not parallel to X axis extrusion in stock setup. This addon fixes it. Also you can mount your X axis endstop 5mm to the left so your printhead will have more space to move (firmware…
There are two models: the loose one - in the pictures - is for normal thickness PET bottle strip, the other is for thin PET strips (on normal thickness, it creates quite some friction ). Printed in PETG, for smoothness, 0.28mm layer, 3…
By now it's a daily driver for years. The cables always got in my way till I decided to design this model. So maybe it will help you too. :) Always be careful when your Hairdryer or Straightener is still hot! On my end it works to store…
Update 08/18/25: I created another version with thinner springs. It feels better and seems like it will hold up a little better when using PLA/+. For softer materials, you may stick with older version. Also went ahead and created a wide…
A model to improve the flow lamination on the output of a garden tap when a hose isn't connected, to allow the flow to be more laminar. https://www.aliexpress.com/item/4001276476719.html I believe the specific ¾" BSP adapter was purchased…
Prevent filament feed failures due to extruder PTFE tube misalignment when using the MMU2s or MMU3 with the MK3s/+ & MK3.5. This is a simple replacement chimney cover maintaining the stock geometry from Prusa while adding a filament guide…
Simple tool to straighten 3/16" or 4.75mm hard brake lines. Just pass the section of brake line through the pulleys and it will straighten it for you. 2 versions included, 12 and 9 roller versions. The 12 roller version I have printed and…
The Straightener model from Blockhead Maker, but simply converted into an STL file with the reverse logo plate removed. Original set of models: True - Wire Bender for making Shallow Screws by Blockhead Maker
Tube Straightener - 4mm Dia I made it 4mm hoping will help me straighten PTFE tube, but it does not work. I decided to post it as it can be used as a benchmark for remixes to larger diameters useful for straightening copper tubes. Update…
Hi, I needed a 26mm tube straightener but really didn't want to spend hundreds of $ in this as I only needed to straight a really small quantity of tubes. I then decided to design something really close to what is available on the market.…
Fit the CNC Kitchen Insert Straighteners: International: https://cnckitchen.store/products/insert-straighteners United States: https://cnckitchenus.store/products/insert-straightener-m2-to-m10-2-56-to-g1-9 The tolerances can be a bit…
The hair straightener flew from one place in the bathroom to another. With this small but useful part you can counteract this. I have found nothing suitable on Prusaprinters, so have gone to Thingiverse. Since the print has brought me a…
hair straightener and hairdryer holder for the side of the bathroom counter
I was looking for a hair straightener wall mount that was: small quick and easy to holster unlikely to scratch the hair staightener The model is a H2D Linear II. I am not sure if the design would need any tweaks to fit other models. Let…
I needed a simple to use and inexpensive handheld wire straightener for the small diameter wire I frequently use. Designed for M22759/32 “tefzel” wire in gauges 22-18 or any other stranded wire with a diameter less than 0.060" Prints easy…
Re design based on IC Lead Straightener by A3D Printing Farm . I have added a curve to the out end as I found that the ICs would get stuck at the exit. I also added an angle to the inside of the channel that bends the legs past vertical…
Wife uses a GHD hair straightener most days and leaves the hot thing turned on and lying on the bathroom counter. Made this to reduce the fire hazard and keep it out of the way. Originally printed nicolapodda version but found it to be…
It was primarily made for hair dryer/straightener/curler but it can be used to hold pretty much any tools that can fit in the slots! Its a remix of the original model :…
To straighten an ingrown toenail. 1. Let your nail grow so that it protrudes 3 mm. 2. (optional) if the plastic part slides forward, put a double-sided tape on your nail first 3. Insert the nail by its flattest part first. 4. cut the…
Tube straightener for Maxline 1/2 inch diameter aluminum sleeve tubing
This model is designed to lean off of the wall slightly, to not leave burn marks, or a potential fire hazard if left hot on the holder.
This is a wide version of the IC Lead Straightener by themaninthesuitcase. This is for 0.6" wide CDIP packages typical for EPROMs, 8-bit CPUs, etc. Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: No Supports: No Notes:…
I edited this model to hold my wife's new hair straightener brush. the model for the brush is the TYMO Ring Plus Ionic Hair Straightener Brush . There is a triangle part on the wall mounting portion of this that is from editing the model.…
i recommend to print in from PETG for rigidity, it works well :)
Printing instructions Print in any material that you see fit, personally I went with PLA I already pre-supported the file (added custom “brims” that you can easily peel away) You need three zip ties - there are files for 3,4 and 5mm thick…
The cords for all my wife's hair things were always getting everywhere, but she didn't really have the time to wrap them all up; so these holders hold the hair things and provide a quick and easy means to keep the cords bundled. Printed…
Impreso en PLA Layer 0.2mm Infill 20%
Features: Holds filament straight for easy measuring Easy and fast print! No supports needed Self-centering Tapered entry hole so filament loads through every time Fits 1.75mm filament Procedure: Install the straightener into your…
Used to get books pushed back the same amount.
Broke my old IC leg straightener (pictures on the right) Made replacement parts. Not quite 1:1 but interchangeable with the original device I had. Sadly, during the assembly of this, one of the springs flew off into the unknown, never to…
3 Spot bathroom Organizer. Made this to help my wife with kitties knocking her stuff on the floor. I printed with PETG a brim to prevent warping auto supports. .16mm layer height 3 walls 25% infill I just used two black drywall screws…
A printed bushing, I have been using until I wait for my bearings to arrive. I printed them in PETG and lubed them up with a TINY drop of grease. They work much better than I expected. I wouldn't have ordered bearings online if I had…
Have you ever been frustrated by the 'out-of-round' toilet paper center tubes that can stop the roll from turning smoothly...especially in the more compact holders? This is a simple tube designed to fit the center tube of most toilet…
This is a customizable wire and tubing straightener that supports both square and round wires/tubes and filaments. By default it is sized for the 608 bearing and supports wire and tube diameters up to about 5mm. If you want to go larger,…
Hair straighener mount, has to be adhered to the wall with sticky-tape. Use at your own risk. I'm not responsible for accidents. I made it with ABS, this specific hair straightener device can be placed on it even if it's hot.
In restoring my car I needed to replace the brake line which comes in a reel. Trying to straightening it by hand is impossible. Amazon has a handy tool which I thought one could design something similar and print it. This is the result. I…
I created a DIY wind simulator and saw designs for airflow straighteners, but I couldn't find one for a giant 150mm fan I am using. The fan I'm using is a Sanyo San Ace 150. The mounting holes fit 1/4-20 machine screws so that's what I…
Toe Nail Straightener Adjust to the appropriate size and you can wear slippers.
CNC Kitchen brought these toold to help the inserts settle flat and, with this bin, they’ll have their own place in a gridfinity system.
Three sizes of drill straightener for your diamond bead painting.
Bathroom hair straightener holder. Individual parts of the holder need to be glued with adhesive. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 mm Infill: 20 Filament: Prusament PETG, PLA…
Strong and easy print Resistente y fácil de imprimir
I really liked the Filament Straightener by Fusebox. It worked well for me, but I found that sometimes the filament was hard to get through the straightener because of an abundance of friction. To combat this I redesigned it taking…
NEW V2 Version Now Added: - Hold up to three separate hair accessories - Grips the cords instead of just using the previous hanging method. - Hair Dryer holder now allows for attachments that may be wide than the ring. A simple wall…
This holds a straightener with a diameter of about 1.45" and even includes a viewing window to see the temperature (if your straightener has that). The straightener is held up by the cord, and the slot not being used by the cord can hold…
Loc-Line Straightener tool for 3/4 Loc-Line. Need to print 2 of them. Small enough to fit on my Prusa Mini Just sandwich around the Loc-Line and squeeze to straighten, then rotate the tool or the Loc-Line to get it straight all the way…
Make your plants straight again with this extremely simple support. Files for 1 to 15cm (about .4 to 6 inches) included (in steps of 1cm). For custom lengths use the .step file or Fusion Archive (.f3d) and customise to your needs.
I kept misplacing my RJ45/Ethernet cable straightener and couldn't decide between placing one on a keyring or sticking one in a spare port ready for me when I need it next. Why decide when you can have both! As a side feature, you could…
Holds 1.75mm filament straight so it can be easily measured accurately. Filament "snaps" in when inserted. Just use calipers, and I recommend using this calculator: https://www.th3dstudio.com/estep-calculator/
I hated using PTFE tube when it is rolled tight, better have it rather straightened. Now you can straighten them. ..and who does not have some leftover tube fittings? You can select in the model files for: PTFE Holder 4x M6 PTFE Holder 4x…
A remix of my original filament straightener model that is created for the minimum filament requirement contest. I hope it works for everyone!
It straightens wire better than I could by hand. Uses M5x20mm bolts and M5 nuts. I highly suggest threading the wire through the rollers as you assemble the unit. I don't think you'll be able to do it after.
I Remixed this from quick61's design for 3mm filament, and to use 608zz bearings (as thats what i had laying around) Original: https://www.thingiverse.com/thing:350242 I have a 3Doodler 3d pen, and the 3Doodler brand filament is stupid…
It frustrates me when I try to calibrate my e-steps and the filament comes out too bended. With bended filament is too hard to measure with calipers properly and it is something that you want to do with precision. Using this straightener…
I added 2 holes to the handle
Wire straightener. If you need wire, but it is not available. You can unwind the coils and transformers. The wire will be bent. To straighten the wire, you need to firmly fix one end of the wire. Pull the wire between the rollers and make…
The tube coming from the MMU3 to the top of the extruder on the MK4 (or MK4S) gets bent. Sometime the filament getting sent down from the MMU3 will catch on the edge of the Festo QSM-M5-4. This model makes sure that the PTFE tube is…
I tried designing missing wall mount for a wall-mounted hair straightener, by jackharvest
I made a simple tool to straighten the lead screw to reduce the Z-wobble introduced by a bend lead screw. Simply watch the dial gauge and bend the lead screw to minimize the deviation. Partslist; - dial gauge - 2020 profile -Dial gauge…
This is a wire straightener for 1.5mm insulated wires Usage : Insert one end into the hole and pull from the other side, it may be a bit hard when it is very tangled so try to straighten it a bit before inserting it 12% infill or more…
Modified to fit on MR105 bearing.
Wall mount version also available! Holder for safe cooling of the hair straightener after use. There is no risk of damaging wooden or plastic storage surfaces, and there is no need to place the iron on a tiled floor, for example. Version…
When I moved my AMS from the top of the unit to the table level of the printer, I kept getting feed errors going into the hub on the back of the printer from the angle of the PTFE tube. I couldnt find a simple one that I liked, so I made…
Edit 27.08.2025 I changed the roller to be better printed I designed a tool to straight your 5/16" wooden arrow. BOM 1x M4x20 Socket Head Screw (DIN 912) 1x M4x7x7 Heat Insert 1x Bearing R8RS (from a old Skateboard I had lying around)
If you want cheap but good arrows, you make them yourself. Aluminum is ideally suited for that. I like those carbon things but them are very expensive. Besides that, the extra weight is desirable with the heavy bows these days. It keeps…
Dropped my Noctua CPU cooler and bent the fins badly. Made these so I can fix them. I printed them in PETG for flexibility and they slide a bit better imho.
Keep your haircare products off the floor and tidy with these handy mounts. Tangled cables eventually cause failure, keep the tangles to a minimum by hanging your haircare devices up rather than chucking them in a basket or on the floor.…
![[Print Flat] Network Cable Untwist and Straightener Tool](https://media.printables.com/media/prints/1012720/images/7697237_90664537-2b29-46d4-9706-ec9c9c18fe64_76fcd479-1c22-42cf-87d0-57d88e2eb1c5/screenshot-2024-09-19-at-80727-pm.png)
