1 / 2
Lamp Socket for IKEA HALVKLART LED-Spotlight
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A socket to hold IKEA's HALVKLART LED Spotlight. With cap variants including visors
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 55
- Makes
- 0
- Views
- 809
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
To bring some light into my 3D Printer enclosure, I printed these sockets to hold IKEA's HALVKLART LED-Spotlights in there. I added a visor to avoid looking directly into the lamps when inspecting my prints.
Printing:
Per Lamp you have to print:
- 1x HALVKLART_Socket_Base
- 1x Either the Cap or one of the Shields
Assembly
- Screw the socket to the ceiling of your enclosure (or cabinat, or wherever you see fit) using 3 wood screws
- The socket was designed to hold the light including the original glue sticker, so it might be a bit loose without it
- https://www.ikea.com/de/de/p/halvklart-led-spot-fuer-schrank-weiss-20451063/
Note: If you want to mirror the ¾ shield for the other side, you'll also have to print a mirrored base to make it fit properly.