Cap for Temptrol shower/bath flow/temperature control
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement for the cap on circa 2000 Temptrol water flow temperature control in the shower bath.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 1
- Views
- 198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Public Domain
Backstory:
I had to adjust the water temp limit on my temptrol in one of my bathrooms and of course the cap was rusty and fell apart when I pried it off. I designed and 3d printed a replacement cap. In the photos you can see the plastic part in the cover photo compared to the stock plug in the second photo.
Print Settings:
I suggest PETG since it needs to be flexible I did 0.15 mm layers, but you might even want to go to 0.1 mm. Supports from the build plate are a must unfortunately, I didn't see an easy way around them without printing it upside down which would make the flat top and not rounded.