Samsung Galaxy Z Fold6 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Phone case for the new Samsung Galaxy Z Fold6. 3 separate pieces to cover front, back, and lenses.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 175
- Makes
- 0
- Views
- 802
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
Because the case I preordered was taking way too long to show up, I decided to design my own! The back cover should hold well enough on its own, but I do recommend adding some sort of adhesive strips to hold the front cover in place (in my case I just used double sided tape).
For the different back cover textures shown in my photos, these are just infill patterns! You can achieve a similar look by doing the following:
- Set bottom layers to 0
- Try different infill patterns and percentages
- Experiment with different top layer values until you get the amount of depth you'd like from the infill texture
No supports should be needed when printing these. Tried printing on both Bambu X1C and Prusa XL at various layer heights and settings, all with good results.