1 / 2
pi-like-stack - stackable customizable raspberry raspi pi case stack scad openscad
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another way to stack pi-like or other SBCs (single board computers) on top of one another.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 75
- Makes
- 1
- Views
- 417
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
pi-like-stack
Yet another way to stack pi-like or other SBCs (single board computers) on top of one another.
For a standard 40pin raspberry pi A/B or similar board you probably want full.stl
https://github.com/BreadMakesYouFull/pi-like-stack
The default board size is for 40-pin like A/B model mainline pi-like devices.
85mm x 56mm x 20mm, with standoffs 2.5mm diameter.
Each layer is 100mm x 75mm.
Printed without-support at 60% infill (PLA)
Requires
- Openscad (or use the pre-made STLs)
Quickstart
openscad ./pi_like_stack.scadPrint Settings
- Printer brand: Creality
- Printer: Ender 3 Pro
- Rafts: No
- Supports: No
- Resolution: 0.28mm
- Infill: 60
- Filament brand: DURAMIC 3D PLA+ Black
- Filament color:black
- Filament material: PLA / PLA+