fast vacuumbag disc
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
spacer disk to facilitate the release of air from the vacuum bags
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 152
- Makes
- 6
- Views
- 486
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Here are two disks that make it much easier to release the air from the vacuum bag using a pump.
PLA/PETG
0.2 Layer high
The 1.5 mm thick disk is the most stable and takes about 6-7 minutes to print (1.09g)
The 0.8 mm thick disk is ready in 4 minutes (0.65g)
An ideal product for recycling filament remnants.
I am currently in the process of creating a suitable storage system for the discs and designing a spacer between the filament roll and the pump
It's worth sticking with it ;)
Update1:
here is the tower for the disc's
Vacuum bag tower von Julius | Kostenloses STL-Modell herunterladen | Printables.com
Update 2:
here is the vacuum back disc holder by @Chasepeeler_2257099
Vacuum Bag Disc Holder von Chase Peeler | Kostenloses STL-Modell herunterladen | Printables.com