1 / 4

fast vacuumbag disc

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

spacer disk to facilitate the release of air from the vacuum bags

Aktualizacja u źródła: 19 paź 2024

Informacje o modelu

Here are two disks that make it much easier to release the air from the vacuum bag using a pump.

PLA/PETG
0.2 Layer high

The 1.5 mm thick disk is the most stable and takes about 6-7 minutes to print (1.09g)

The 0.8 mm thick disk is ready in 4 minutes (0.65g)

An ideal product for recycling filament remnants.

I am currently in the process of creating a suitable storage system for the discs and designing a spacer between the filament roll and the pump

It's worth sticking with it ;)

Update1:

Update 2:

here is the vacuum back disc holder by @Chasepeeler_2257099