1 / 8
Sony Kitlens Lenshood with integrated cover — image 1
1 / 8

Sony Kitlens Lenshood with integrated cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a lenshood for your Sony kitlens with an single or double integrated lenscover

Rating
0 / 5
Likes
8
Downloads
35
Makes
0
Views
247
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike
This is a lenshood for the Sony Kitlens. It is obviously inpired by the many square hood desings out there. 

 

To assemble the hood, you need a screw-on filterring with a M40.5 thread. The standard design is made for the K&F filters with am outer diameter of 42.85 mm. Just screw the ring on and line the hood up. Then take it of again and press the hood onto the ring. Be careful to not break the little endstops.

The tolerance is pretty tight, so the hood is realy snug un the ring.

The hinge pin for the cover is just a piece of 1.75 mm filament.

If you need a different size hole, just ask, i can make it for you. Or modify the STEP file.

 

I have some other models for your Sony camera, so maybe check them out :-]

Tags